SHURflo Pro-Blaster II Deluxe Deck Washdown Pump 4.0 GPM (15.1 LPM)
Shurflo Pro-Blaster Pumps are ideal for washing down the grimiest deck, fish box scaling, and anchor chain cleaning.
- Electro-coated motor, O-ring seal and sealed wire entries enhance corrosion resistance.
- A filter must be fitted on the inlet side of the pump.
- Can run dry without damage.
- Mounting screw size dia. 3/16 inch (4.8mm).
- RCM Certified to Australian Standards. Thermally Protected, CE Certified, Ignition Protected ISO 8846.
NOTE:
- Pump must be installed in a DRY location. Do not install pump in wet areas.
- Do not use Teflon tape or sealing compounds on pump threads.
- This pump is not supplied with hose tail or water strainer.
- This pump is supplied in an unbranded box, and doesn't include fittings. A version supplied in a branded retail box, with fittings, is also available.
| Part Number |
Voltage |
Amps |
Fuse |
Port Size Inlet/Outlet |
Flow Rate |
Shut-Off Pressure |
Length |
Width |
Height |
| SHF-4248-153-A09 |
12V |
10 Amps |
15 Amps |
1/2" NPT |
15.1 LPM (4.0 GPM) |
60 PSI |
254mm |
127mm |
120mm |